Project Description

Description

CVMORE T8 bypass LED lamps are suitable for 1-1 replacements of existing 17W fluorescent tubes. These tubes are made from aluminum for better heat dissipation. They can be installed in new constructions, but also in retrofit projects, where they can offer huge savings over traditional lighting.

Our Bypass T8 lamps are designed to operate in line voltage and non-shunted lamp holders. The only thing you should do is to bypass the ballast and connect the lamp to direct voltage. You can experience 40% percent savings from electricity and experience a 60.000 hours’ maintenance free operation and without having to care about the ballast lifetime.

LIGHT & MECHANICAL SPECIFICATIONS

MODEL NUMBER UTUBE82FBP10W.3500K
(3500K)
UTUBE82FBP10W.4000K
(4000K)
UTUBE82FBP10W.5000K
(5000K)
Input Wattage 10W 10W 10W
Input Voltage AC 100 – 277V AC 100 – 277V AC 100 – 277V
Frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
Delivered Lumens (lm) 1100 1100 1100
Efficacy (lm/W) 110 lm/W 110 lm/W 110 lm/W
CRI >80 >80 >80
Optics 120° 120° 120°
Body Aluminum Aluminum Aluminum
Base Bi – pin (G13) Bi – pin (G13) Bi – pin (G13)
Power Factor >0.9 >0.9 >0.9
THD <15% <15% <15%
Color Temperature (CCT) 3500K 4000K 5000K
Longevity (Life Hours) L70 60.000hrs 60.000hrs 60.000hrs
Lumen Maintenance 70% end of nominal life 70% end of nominal life 70% end of nominal life
Dimensions 2ft (24’’) 2ft (24’’) 2ft (24’’)
Weight 0.27lbs 0.27lbs 0.27lbs
Operating Temperature -22°F ~ 122°F -22°F ~ 122°F -22°F ~ 122°F
IP Rating IP 40 IP 40 IP 40
Validations UL, DLC, LM80, LM79, TM21 UL, DLC, LM80, LM79, TM21 UL, DLC, LM80, LM79, TM21